Manufacturer's Part#: ATMC101XL10
Product Dimensions: 11 Inches x 6 Inches x 3 Inches
Weight: 2.32 Lbs

Features:
General Information
- Product Line: AT-MC100 Series
- Marketing Information: The media converter features an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converter also allows the installer to test the integrity of fiber connection, by forcing the converter to communicate over the fiber cable. This 'Link Test' feature allows installers to check for cable faults without the need for expensive fiberoptic test equipment.

Networking
- Ports: 1 x RJ-45 100Base-TX Port(s) (LAN), 1 x ST 100Base-FX Port(s) (LAN)

Media & Performance
- Connectivity Media: 100Base-TX (UTP), 100Base-FX 1310 nm Multimode (Fiber)
- Data Transfer Rate: 100MBps Fast Ethernet
- Supported Distance: 1.24 mi Multimode Fiber, 328.08 ft UTP

Protocols & Management
- Protocols Supported: Fast Ethernet
- Status LEDs: Front Panel:

- Power: Indicates power is applied to the converter

- Link (2): Indicates a valid receive link exists

- Receive (2): Indicates valid data being received by converter

- Normal/Test: Fiber test or normal operation

Power Description
- Input Voltage: 12V DC ±5%
- Power Consumption: 6W (Operating)

Environmental Conditions
- Temperature: 32 to 104°F (Operating)
- Humidity: 5 to 95% (Operating)
- Altitude: 0 to 10000 ft (Operating)

Physical Characteristics
- Color: White
- Dimensions: 1.0" (Height) x 4.12" (Width) x 3.75" (Depth)
- Shipping Dimensions: 3.00" (Height) x 6.00" (Width) x 11.00" (Depth)
- Weight: 0.65 lb
- Shipping Weight: 2.31 lb

Miscellaneous
- Additional Information: - Half and Full Duplex operation

- Transparent to 802.1Q packets

- Fits the AT-MCR12 rackmount chassis

- MDI/MDIX

- MissingLink

- Link Test



External Power Supply:

- 100-240vAC, 50/60Hz +/- 3%



PACKET TRANSMISSION CHARACTERISTICS:

- Round Trip Delay: 0.4µs Maximum

- Bit Error Rate (BER): < 10 -12



TWISTED PAIR INTERFACE:

- UTP Differential Output Voltage:

- Typical: 980mv

- Min: 950mv

- Max: 1050mv

- Overshoot Voltage:

- Typical: 4%

- Max: 5%

- Single Amplitude Symmetry:

- Typical: 1.0062

- Min: 0.98

- Max: 1.02

- Rise and Fall Time:

- Rise:

- Typical: 4.6ns

- Min: 3.0ns

- Max: 5.0ns

- Fall:

- Typical: 4.2ns

- Min: 3.0ns

- Max: 5.0ns

- Rise and Fall Time Symmetry:

- Typical: 0.4ns

- Max: 0.5ns



Port Type (Connector):

- 100FX MMF:

- Launch Power (dBm):

- Max: -14.0

- Avg: -16.8

- Min: -19.0

- Receive Power (dBm):

- Min. Sensitivity: -31.8

- Typical Sensitivity: -34.5

- Saturation: -14.0
- Certifications & Standards: - IEEE 802.3U-LAN



EMC:

- FCC Class A



Safety:

- UL-Cul

- CSA/CSA

- NRTL

- TUV

- CE

Warranty & Support
- Standard Warranty: Lifetime

Options and Accessories:
Switches & Bridges
XXXXXX - Rackmount Chassis - AT-MCR12

GENERAL INFORMATION- MANUFACTURER: ALLIED TELESYN INC
- MANUFACTURER PART NUMBER: AT-MC101XL-10
- PRODUCT NAME: AT-MC101XL MEDIA CONVERTER
- MARKETING INFORMATION: THE MEDIA CONVERTER FEATURES AN INTERNAL
MDI/MDIX SWITCH ALLOWING THE CONVERTER TO BE CONNECTED TO EITHER A
PC HUB OR SWITCH WITH A SIMPLE UTP CABLE. THE MEDIA CONVERTER ALSO
ALLOWS THE INSTALLER TO TEST THE INTEGRITY OF FIBER CONNECTION BY
FORCING THE CONVERTER TO COMMUNICATE OVER THE FIBER CABLE. THIS
'LINK TEST' FEATURE ALLOWS INSTALLERS TO CHECK FOR CABLE FAULTS
WITHOUT THE NEED FOR EXPENSIVE FIBEROPTIC TEST EQUIPMENT.
- PRODUCT TYPE: MEDIA CONVERTER

INTERFACES/PORTS
- INTERFACES/PORTS: 1 X RJ-45 100BASE-TX PORT(S) LAN
- INTERFACES/PORTS: 1 X ST 100BASE-FX PORT(S) LAN

MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: 100BASE-TX UTP
- CONNECTIVITY MEDIA: 100BASE-FX 1310 NM MULTIMODE FIBER
- DATA TRANSFER RATE: 100MBPS FAST ETHERNET

MANAGEMENT & PROTOCOLS
- PROTOCOLS: FAST ETHERNET

PHYSICAL CHARACTERISTICS
- DIMENSIONS: 1.0 HEIGHT X 4.12 WIDTH X 3.75 DEPTH
- WEIGHT: 0.65 LB

WARRANTY
- STANDARD WARRANTY: LIFETIME