Catalyst 4000 Supervisor II Console(Rj-45) Mgt(Rj-45)
Price: US$6616.50   (IN STOCK!)
Platform: PC
Publisher: Cisco Systems - Channel
Category: [IBM Lan Equipment - Internetworking ]

Manufacturer's Part#: WSX4013
Product Dimensions: 22.25 Inches x 22 Inches x 4.25 Inches
Weight: 8.64 Lbs

Features:
General Information
- Product Line: Catalyst 4000
- Marketing Information: The WS-X4013 supervisor engine is used in the Catalyst 4006 switch. This supervisor engine provides data path and data control for all network interfaces.

Networking
- Module Type: Supervisor Engine
- Ports/Channels: 1 x RJ-45 10/100Base-TX (Management), 1 x RJ-45 Console (Management)
- Expansion Slots: 2 x GBIC

Media & Performance
- Connectivity Media: Twisted Pair (10/100Base-TX)
- Data Transfer Rate: 10Mbps Ethernet, 100Mbps Fast Ethernet, 1Gbps Gigabit Ethernet

Protocols & Management
- Management: Ethernet Management Port:

- TCP/IP-based management services available through inband access also are provided through this port (Telnet and SNMP). This management port also supports image download.



The console port allows you to perform the following functions:

- Configure the switch from the CLI

- Monitor network statistics and errors

- Configure SNMP agent parameters

- Download software updates to the switch or distribute software images residing in Flash memory to attached devices
- Status LEDs: - STATUS

- UTILIZATION

- Link

- Active
- Controls: Reset

Processor & Storage
- Processor: 150MHz
- Memory: 8MB Packet Memory per Engine (Installed), 1MB NVRAM (Installed), 16MB Flash Memory (Installed), 64MB SDRAM (Installed)

Miscellaneous
- Additional Information: - Redundant Capable: No

- Performance: 24 Gbps, 18 Mpps (Layer 2 only)

- Multi-Layer Switching: Layer 2

- Upgradeable to Netflow Services Card: No

- CompactFlash: Not Supported

- MAC Addresses: 16,384 MAC addresses

- Queues per port: Two

- Architecture: Three 24-Gbps switching engines

- Memory Speed: 74 MHz

- Operating System: Cisco Catalyst OS

- The supervisor engine is hot swappable, but packets are not forwarded while the supervisor engine is being removed. When a supervisor engine is reinserted, the system reboots.

- The 10/100BASE-T Ethernet management port is for network management only. This port does not support network switching.



QOS:

- System-based QoS

- Classification

- Scheduling
- System Requirements: Minimum Software Requirement (Catalyst 4503 and 4506 with Supervisor II):

- Catalyst OS Software Version 7.4(1) or higher



Software requirements (Cisco Catalyst 4006 Supervisor Engine II):

- Cisco Catalyst 4000 Family Supervisor Engine Software Version 5.4(x) or higher
- Certifications & Standards: Compliance:

- CE Marking



Safety:

- UL 1950

- CSA-C22.2 No. 950

- EN60950

- IEC 60950

- TS001

- AS/NZS 3260



EMC:

- FCC Part 15, Class A (CFR10 47) (USA)

- ICES-003 Class A (Canada)

- EN55022 Class A (Europe)

- CISPR22 Class A (International)

- AS/NZS 3548 Class A (Australia)

- VCCI13 Class A (Japan) with UTP
- Compatibility: - Catalyst 4006 switch

- Catalyst 4503 switch

- Catalyst 4506 switch

Environmental Conditions
- Temperature: 32 to 104°F (Operating), 0 to 40°C (Operating), -40 to 167°F (Storage), -40 to 75°C (Storage)
- Humidity: 10 to 90% non-condensing relative humidity
- Altitude: -196.84 to 13123.32 ft (Operating)

Physical Characteristics
- Shipping Dimensions: 4.5" (Height) x 22.25" (Depth)
- Shipping Weight: 8.52 lb

Warranty & Support
- Standard Warranty: 90 Day(s) Limited

Options and Accessories:
Modules
XXXXXX - Cisco 1000BASE-ZX extended-reach GBIC (single mode)
- WS-G5487
XXXXXX - Cisco 1000BASE-LX/LH long-haul GBIC (single mode or multimode)
- WS-G5486
XXXXXX - Cisco 1000BaseSX GBIC Module - WS-G5484

- MANUFACTURER: CISCO SYSTEMS
- MANUFACTURER PART NUMBER: WS-X4013=
- PRODUCT LINE: CATALYST
- PRODUCT SERIES: 4000
- PRODUCT NAME: CATALYST 4000 SERIES SUPERVISOR ENGINE II
- MARKETING INFORMATION: THE WS-X4013 SUPERVISOR ENGINE IS USED IN
THE CATALYST 4006 SWITCH. THIS SUPERVISOR ENGINE PROVIDES DATA PATH
AND DATA CONTROL FOR ALL NETWORK INTERFACES.
- MANUFACTURER WEBSITE ADDRESS: WWW.CISCO.COM

NETWORKING
- MODULE TYPE: SUPERVISOR ENGINE
- PORTS/CHANNELS DETAILS: 1 X RJ-45 10/100BASE-TX MANAGEMENT1 X RJ-45
CONSOLE MANAGEMENT
- EXPANSION SLOTS: 2 X GBIC

MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: TWISTED PAIR 10/100BASE-TX
- DATA TRANSFER RATE: 10MBPS ETHERNET100MBPS FAST ETHERNET1GBPS
GIGABIT ETHERNET

PROTOCOLS & MANAGEMENT
- MANAGEMENT: ETHERNET MANAGEMENT PORT:
- TCP/IP-BASED MANAGEMENT SERVICES AVAILABLE THROUGH INBAND ACCESS
ALSO ARE PROVIDED THROUGH THIS PORT (TELNET AND SNMP). THIS
MANAGEMENT PORT ALSO SUPPORTS IMAGE DOWNLOAD.

THE CONSOLE PORT ALLOWS YOU TO PERFORM THE FOLLOWING FUNCTIONS:
- CONFIGURE THE SWITCH FROM THE CLI
- MONITOR NETWORK STATISTICS AND ERRORS
- CONFIGURE SNMP AGENT PARAMETERS
- DOWNLOAD SOFTWARE UPDATES TO THE SWITCH OR DISTRIBUTE SOFTWARE
IMAGES RESIDING IN FLASH MEMORY TO ATTACHED DEVICES
- STATUS LEDS: - STATUS
- UTILIZATION
- LINK
- ACTIVE
- CONTROLS: RESET SWITCH

PROCESSOR & STORAGE
- PROCESSOR: 150MHZ
- MEMORY: 8MB PACKET MEMORY PER ENGINE INSTALLED1MB NVRAM
INSTALLED16MB FLASH MEMORY INSTALLED64MB SDRAM INSTALLED

MISCELLANEOUS
- ADDITIONAL INFORMATION: - REDUNDANT CAPABLE: NO
- PERFORMANCE: 24 GBPS 18 MPPS (LAYER 2 ONLY)
- MULTI-LAYER SWITCHING: LAYER 2
- UPGRADEABLE TO NETFLOW SERVICES CARD: NO
- COMPACTFLASH: NOT SUPPORTED
- MAC ADDRESSES: 16 384 MAC ADDRESSES
- QUEUES PER PORT: TWO
- ARCHITECTURE: THREE 24-GBPS SWITCHING ENGINES
- MEMORY SPEED: 74 MHZ
- OPERATING SYSTEM: CISCO CATALYST OS
- THE SUPERVISOR ENGINE IS HOT SWAPPABLE BUT PACKETS ARE NOT
FORWARDED WHILE THE SUPERVISOR ENGINE IS BEING REMOVED. WHEN A
SUPERVISOR ENGINE IS REINSERTED THE SYSTEM REBOOTS.
- THE 10/100BASE-T ETHERNET MANAGEMENT PORT IS FOR NETWORK MANAGEMENT
ONLY. THIS PORT DOES NOT SUPPORT NETWORK SWITCHING.

QOS:
- SYSTEM-BASED QOS
- CLASSIFICATION
- SCHEDULING
- SYSTEM REQUIREMENT: MINIMUM SOFTWARE REQUIREMENT (CATALYST 4503 AND
4506 WITH SUPERVISOR II):
- CATALYST OS SOFTWARE VERSION 7.4(1) OR HIGHER

SOFTWARE REQUIREMENTS (CISCO CATALYST 4006 SUPERVISOR ENGINE II):
- CISCO CATALYST 4000 FAMILY SUPERVISOR ENGINE SOFTWARE VERSION
5.4(X) OR HIGHER
- CERTIFICATIONS & STANDARDS: COMPLIANCE:
- CE MARKING

SAFETY:
- UL 1950
- CSA-C22.2 NO. 950
- EN60950
- IEC 60950
- TS001
- AS/NZS 3260

EMC:
- FCC PART 15 CLASS A (CFR10 47) (USA)
- ICES-003 CLASS A (CANADA)
- EN55022 CLASS A (EUROPE)
- CISPR22 CLASS A (INTERNATIONAL)
- AS/NZS 3548 CLASS A (AUSTRALIA)
- VCCI13 CLASS A (JAPAN) WITH UTP
- COMPATIBILITY: - CATALYST 4006 SWITCH
- CATALYST 4503 SWITCH
- CATALYST 4506 SWITCH

ENVIRONMENTAL CONDITIONS
- TEMPERATURE: 32 TO 104 F (0 TO 40 C) OPERATING-40 TO 167 F (-40 TO
75 C) STORAGE
- HUMIDITY: 10 TO 90% NON-CONDENSING RELATIVE HUMIDITY
- ALTITUDE: -196.84 TO 13123.32 FT OPERATING

PHYSICAL CHARACTERISTICS
- SHIPPING DIMENSIONS: 4.5 HEIGHT X 22.25 DEPTH
- SHIPPING WEIGHT: 8.52 LB

WARRANTY & SUPPORT
- STANDARD WARRANTY: 90 DAY(S) LIMITED

OPTIONS AND ACCESSORIES
* MODULES
- () - WS-G5484 - CISCO 1000BASESX GBIC MODULE
- () - WS-G5486 - CISCO 1000BASE-LX/LH LONG-HAUL GBIC (SINGLE MODE OR
MULTIMODE)
- () - WS-G5487 - CISCO 1000BASE-ZX EXTENDED-REACH GBIC (SINGLE MODE)