4Port T1 Atm Network Module With Ima (Us#181455)
Price: US$4414.60   (IN STOCK!)
Platform: PC
Publisher: Cisco Systems - Channel
Category: [IBM Utilities ]

Manufacturer's Part#: NM4T1IMA
Product Dimensions: 15.65 Inches x 10.3 Inches x 3.25 Inches
Weight: 2.08 Lbs

Features:
General Information
- Marketing Information: The 4-port T1 ATM Network Module with IMA provides access to ATM WAN up-links at fractional T3 bandwidths. Each link provides 4 ports with up to 6 Mbps connectivity. The T1 version provides an RJ-45 connector with integrated CSU/DSU.

Networking
- Module Type: Network Module
- Ports/Channels: 4 x RJ-45 (female) T1 ATM (WAN)

Media & Performance
- Connectivity Media: 100-ohm Twisted Pair
- Data Transfer Rate: 1.544Mbps T1

Protocols & Management
- Management: This feature supports the following Management Information Base (MIBs):

- IMA MIB (ATM Forum, AF-PHY-0086.000)

- DS1/E1 MIB (as defined in RFC 1406)

- Chassis MIB
- Status LEDs: - AL (Alarm)

- LP (Loopback)

- CD (Carrier Detect)

- EN (Enable LED)

Miscellaneous
- Additional Information: Modular Router Solutions:

- ATM Edge Connectivity

- Bandwidth Management

- DCN (Data Communications Network)

- LAN-to-LAN Routing

- TDM/Drop&Insert

- VPN & Firewall Solutions

- Voice & Fax Integration



T1 Interfaces Physical Specifications:

- Line rate: 1.544 Mbps + 50bps

- Line code: binary 8-zero substitution (B8ZS) per ANSI T1.408

- Line framing: extended superframe format (extended superframe (ESF) 24-frame multiframe) per ANSI T1.408

- Input jitter tolerance: per ATT TR 62411

- Output jitter generation: per ATT TR62411 using normal mode sync

- Physical layer alarms: Loss of signal (LoS), out of frame (OF), alarm indication signal (AIS) remote deflect identification (RDI)



ATM Alarm Signals supported:

- LoS

- Loss of frame (LF)

- Loss of signaling multiframe

- Loss of CRC multiframe

- Reception of remote alarm signal

- Remote multiframe alarm signal

- Alarm indication signal (AIS)

- Timeslot 16 AIS



Protocols supported:

- Full Cisco IOS software as of 12.0(5)T



Comments:

- Maximum of one per Cisco 2600 and 3620

- Maximum of three per Cisco 3640
- System Requirements: - Requires an IOS "PLUS" feature set

- No reliance on other network modules
- Certifications & Standards: - RFC 1460

- RFC 1573-if GeneralGroup and if StackGroup from the Interfaces Group of MIB-II



EMI:

- Class B EMI



ATM Forum Specifications:

- AF-PHY-0086.000-IMA 1.0 specification

- AF-PHY-0016-DS1/ESF and B8ZS specification

- AF-PHY-0064-E1/G.704 framing specification

- ITU.I432-UNI physical layer specification

- ITU.I432.3-Physical layer specifications for T1/E1

- ITU.I431

- ATM Forum UNI 3.0, 3.1, and 4.0 signaling for point-to-point and point-to-multipoint SVCs

- ATM Forum UNI 4.0 signaling for ABR SVCs

- ATM Forum ILMI for address prefix acquisition and ATM service address registration with UNI-compliant switches throughout the ATM network

- ATM network service access point (NSAP) E.164 address support

- F4 (virtual path) and F5 (virtual connection) OAM cell segment and end-to-end flows, RDI, and alarm indication signal (AIS)

- Regulatory Approvals

- UL 1950

- FCC Part 15, Class A
- Compatibility: Supported Platforms & Minimum IOS Versions:

- 3745 - 12.2(8)T

- 3725 - 12.2(8)T

- 3660 series - 12.0(5)T

- 3640 - 12.0(5)T

- 3620 - 12.0(5)T

- 2691 - 12.2(8)T1

- 2650 - 12.1(3)T

- 2600XM Series - 12.1(14) or 12.2(8)T1

- 2600 series - 12.0(5)T

- 1720 - Not Available

- 1600 series - Not Available

Environmental Conditions
- Temperature: 32 to 104°F (Operating), 0 to 40°C (Operating), -13 to 158°F (Non-operating), -25 to 70°C (Non-operating)
- Humidity: 5 to 95% relative humidity

Physical Characteristics
- Dimensions: 1.55" (Height) x 7.10" (Width) x 7.2" (Depth)
- Shipping Dimensions: 2.75" (Height) x 16.00" (Depth)
- Weight: 2.5 lb (Maximum)
- Shipping Weight: 3.03 lb

Warranty & Support
- Standard Warranty: 90 Day(s) Limited