8Port Ser V.35Port Adapter
Price: US$9237.39   (IN STOCK!)
Platform: PC
Publisher: Cisco Systems - Channel
Category: [IBM Lan Equipment - Internetworking ]

Manufacturer's Part#: PA8TV35
Product Dimensions: 16 Inches x 10.5 Inches x 2.75 Inches
Weight: 2 Lbs

Features:
General Information
- Marketing Information: Increasing demand for bandwidth-intensive services and wide-area network (WAN) connectivity requires that network administrators maximize the capacity and efficiency of network routers. Cisco Systems' serial port adapters provide network administrators with flexible options for a broad range of port density requirements. Cisco's eight-port serial port adapter enhances network performance at a low price per port---making them a cost-effective solution for maximizing router efficiency.



Cisco's eight-port serial port adapter (PA-8T) delivers high-density WAN connectivity for enterprise and service provider networks. It provides up to eight full-duplex serial interfaces for the Cisco 7200 and 7500 Series routers. The eight-port adapter requires only a single slot in a Cisco 7200 Series router. For Cisco 7500 Series routers, it requires one of the two available adapter slots on a Versatile Interface Processor (VIP2). Its high density doubles the number of available ports in the same space as the four port adapter (PA-4T+). This enables up to sixteen ports per chassis slot in VIP2-based systems.



The eight-port adapter offers unmatched flexibility. Network administrators can provision eight T1 (1.55 Mbps) or E1 (2.048 Mbps) ports, four ports delivering speeds up to 4 Mbps, or two ports delivering speeds up to 8 Mbps (E2).

Networking
- Module Type: Port Adapter
- Ports/Channels: 1 x Molex LFH 200-pin T1/E1 Connector, 8 x Synchronous Serial Channels

Media & Performance
- Connectivity Media: Serial Cable
- Supported Distance: 25 to 4100 ft
- Data Transfer Rate: 1.55Mbps T1 (Full-duplex), 2.048Mbps E1 (Full-duplex)

Protocols & Management
- Status LEDs: - One row of eight status LEDs (one for each port)

- One enabled (EN) LED

Miscellaneous
- Additional Information: - Supports eight full-duplex T1/E1 connections or two full-duplex E2 connections

- Eight full-duplex ports at T1 (1.55 Mbps) or E1 (2.048 Mbps)

- Four full-duplex ports at up to 4 Mbps each

- Two full-duplex ports at up to E2 speeds (8 Mbps)

- Adapter cables determine port mode (DTE or DCE)

- Effectively doubles number of available ports in same space

- Field-replaceable design permits online insertion and removal for continuous router availability

- Port-adapter handles simplify installation and removal

- Separate LEDs for each port indicate DTE or DCE function, transmit data, transmit clock, receive data, and receive clock signals

- Metric (M3) thumbscrews included with each port adapter cable allow connections to devices that use metric hardware
- System Requirements: - Requires only a single slot in a Cisco 7200 Series router

- Requires one of the two available adapter slots on a Versatile Interface Processor (VIP2)
- Compatibility: - Cisco 7200 and 7500 Series routers

Physical Characteristics
- Shipping Dimensions: 2.75" (Height) x 10.5" (Width) x 16.00" (Depth)
- Shipping Weight: 2.00 lb

Warranty & Support
- Standard Warranty: 90 Day(s) Limited

Options and Accessories:
Connector Cables
147213 - 8 Lead Octal Cable and 8 Female V35 DCE Connectors
- CAB-OCT-V35-FC=
147212 - Cisco Shielded Serial Cable (CAB-OCT-V35-MT=) - CAB-OCT-V35-MT=

- MANUFACTURER: CISCO SYSTEMS
- MANUFACTURER PART NUMBER: PA-8T-V35=
- PRODUCT NAME: PORT ADAPTER
- MARKETING INFORMATION: INCREASING DEMAND FOR BANDWIDTH-INTENSIVE
SERVICES AND WIDE-AREA NETWORK (WAN) CONNECTIVITY REQUIRES THAT
NETWORK ADMINISTRATORS MAXIMIZE THE CAPACITY AND EFFICIENCY OF
NETWORK ROUTERS. CISCO SYSTEMS' SERIAL PORT ADAPTERS PROVIDE NETWORK
ADMINISTRATORS WITH FLEXIBLE OPTIONS FOR A BROAD RANGE OF PORT
DENSITY REQUIREMENTS. CISCO'S EIGHT-PORT SERIAL PORT ADAPTER
ENHANCES NETWORK PERFORMANCE AT A LOW PRICE PER PORT---MAKING THEM A
COST-EFFECTIVE SOLUTION FOR MAXIMIZING ROUTER EFFICIENCY.

CISCO'S EIGHT-PORT SERIAL PORT ADAPTER (PA-8T) DELIVERS HIGH-DENSITY
WAN CONNECTIVITY FOR ENTERPRISE AND SERVICE PROVIDER NETWORKS. IT
PROVIDES UP TO EIGHT FULL-DUPLEX SERIAL INTERFACES FOR THE CISCO
7200 AND 7500 SERIES ROUTERS. THE EIGHT-PORT ADAPTER REQUIRES ONLY A
SINGLE SLOT IN A CISCO 7200 SERIES ROUTER. FOR CISCO 7500 SERIES
ROUTERS IT REQUIRES ONE OF THE TWO AVAILABLE ADAPTER SLOTS ON A
VERSATILE INTERFACE PROCESSOR (VIP2). ITS HIGH DENSITY DOUBLES THE
NUMBER OF AVAILABLE PORTS IN THE SAME SPACE AS THE FOUR PORT ADAPTER
(PA-4T+). THIS ENABLES UP TO SIXTEEN PORTS PER CHASSIS SLOT IN
VIP2-BASED SYSTEMS.

THE EIGHT-PORT ADAPTER OFFERS UNMATCHED FLEXIBILITY. NETWORK
ADMINISTRATORS CAN PROVISION EIGHT T1 (1.55 MBPS) OR E1 (2.048 MBPS)
PORTS FOUR PORTS DELIVERING SPEEDS UP TO 4 MBPS OR TWO PORTS
DELIVERING SPEEDS UP TO 8 MBPS (E2).
- MANUFACTURER WEBSITE ADDRESS: WWW.CISCO.COM

NETWORKING
- MODULE TYPE: PORT ADAPTER
- PORTS/CHANNELS: 8 X T1/E1 WAN
- PORTS/CHANNELS DETAILS: 1 X MOLEX LFH 200-PIN T1/E1 CONNECTOR(S)8 X
SYNCHRONOUS SERIAL CHANNEL(S)

MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: SERIAL CABLE
- SUPPORTED DISTANCE: 25 TO 4100 FT
- DATA TRANSFER RATE: 1.55MBPS T1 FULL-DUPLEX2.048MBPS E1 FULL-DUPLEX

PROTOCOLS & MANAGEMENT
- STATUS LEDS: - ONE ROW OF EIGHT STATUS LEDS (ONE FOR EACH PORT)
- ONE ENABLED (EN) LED

MISCELLANEOUS
- ADDITIONAL INFORMATION: - SUPPORTS EIGHT FULL-DUPLEX T1/E1
CONNECTIONS OR TWO FULL-DUPLEX E2 CONNECTIONS
- EIGHT FULL-DUPLEX PORTS AT T1 (1.55 MBPS) OR E1 (2.048 MBPS)
- FOUR FULL-DUPLEX PORTS AT UP TO 4 MBPS EACH
- TWO FULL-DUPLEX PORTS AT UP TO E2 SPEEDS (8 MBPS)
- ADAPTER CABLES DETERMINE PORT MODE (DTE OR DCE)
- EFFECTIVELY DOUBLES NUMBER OF AVAILABLE PORTS IN SAME SPACE
- FIELD-REPLACEABLE DESIGN PERMITS ONLINE INSERTION AND REMOVAL FOR
CONTINUOUS ROUTER AVAILABILITY
- PORT-ADAPTER HANDLES SIMPLIFY INSTALLATION AND REMOVAL
- SEPARATE LEDS FOR EACH PORT INDICATE DTE OR DCE FUNCTION TRANSMIT
DATA TRANSMIT CLOCK RECEIVE DATA AND RECEIVE CLOCK SIGNALS
- METRIC (M3) THUMBSCREWS INCLUDED WITH EACH PORT ADAPTER CABLE ALLOW
CONNECTIONS TO DEVICES THAT USE METRIC HARDWARE
- SYSTEM REQUIREMENT: - REQUIRES ONLY A SINGLE SLOT IN A CISCO 7200
SERIES ROUTER
- REQUIRES ONE OF THE TWO AVAILABLE ADAPTER SLOTS ON A VERSATILE
INTERFACE PROCESSOR (VIP2)
- COMPATIBILITY: - CISCO 7200 AND 7500 SERIES ROUTERS

PHYSICAL CHARACTERISTICS
- SHIPPING DIMENSIONS: 2.75 HEIGHT X 10.5 WIDTH X 16.00 DEPTH
- SHIPPING WEIGHT: 2.00 LB

WARRANTY & SUPPORT
- STANDARD WARRANTY: 90 DAY(S) LIMITED

OPTIONS AND ACCESSORIES
* CONNECTOR CABLES
- (147212) - CAB-OCT-V35-MT= - CISCO FAN-OUT CABLE - 10FT - 8 X V.35
1 X LFH - SERIAL V.35 CABLE EXTERNAL
- (147213) - CAB-OCT-V35-FC= - 8 LEAD OCTAL CABLE AND 8 FEMALE V35
DCE CONNECTORS