FEATURES- High Gain Antenna for SMA Connectors
       Increase the range of your Wireless network! Attach this high gain 
        antenna to your Linksys wireless networking device, and increase 
        both the effective strength of the outgoing signals, and the 
        receive sensitivity for incoming signals. The added signal strength 
        and sensitivity also improves close-range communication reliability 
        because every packet comes through "loud and clear", reducing 
        retransmissions due to weak signal reception errors. 
       To install, just unscrew your current antenna, and attach the High 
        Gain antenna in its place. There are no drivers to install, and no 
        modifications to your setup are necessary. 
       The Linksys High Gain Antenna saves wiring costs and helps to build 
        corporate wireless infrastructure by driving stronger signals into 
        distant corners and hard-to-reach areas. And it is perfect for 
        covering large areas in warehouse environments, public spaces, 
        wireless hotspots, and outdoor venues -- anywhere you need extra 
        coverage for your wireless network. 
       Works with WRV54G, WMP54GS, WMP54G, WET54G, WET54GS5, AS1SMA 
        (Antenna Stand).
    Includes High gain antenna for SMA connectors.
* Increases the effective range of Linksys wireless devices.
* Stronger signal increases wireless coverage into hard-to-reach areas.
* Improves throughput by reducing retransmissions Easy installation -- 
  simply replace your current antenna.
  
  -- SPECIFICATIONs --------------------------------------
GAIN         - 7 dBi
FREQ. RANGE  - 2.4 GHz ~ 2.5 GHz
VOLTAGE STANDING WAVE RATIO (VSWR)-
               1.92 Max.
POLARIZATION - Linear Vertical
DIRECTION    - Omnidirectional
IMPEDANCE    - 50 Ohms Nominal
CONNECTOR    - Reverse SMA
APPROVALS    - FCC
ENVIRONMENTAL- Operating Temperature: - 4 ~ 149 degrees F
               Storage Temperature  : -22 ~ 167 degrees F
               Operating Humidity   : 0 ~ 85% Non-Condensing
SIZE - 11.22"l x 0.47"d                       WT.- 1.41 oz.

Linksys High Gain Antenna for SMA Connectors, 7dBi Omni-Directional, 2.4-2.5GHz. Works with: WRV54G, WMP54GS, WMP54G. WET54G. WET54GS.

GENERAL INFORMATION- MANUFACTURER: LINKSYS
- MANUFACTURER PART NUMBER: HGA7S
- MANUFACTURER WEBSITE ADDRESS: WWW.LINKSYS.COM
- PRODUCT NAME: HGA7S OMNI-DIRECTIONAL ANTENNA
- MARKETING INFORMATION: INCREASE THE RANGE OF YOUR WIRELESS NETWORK!
ATTACH THIS HIGH GAIN ANTENNA TO YOUR LINKSYS WIRELESS NETWORKING
DEVICE AND INCREASE BOTH THE EFFECTIVE STRENGTH OF THE OUTGOING
SIGNALS AND THE RECEIVE SENSITIVITY FOR INCOMING SIGNALS
- PRODUCT TYPE: OMNI-DIRECTIONAL ANTENNA

TECHNICAL INFORMATION
- FREQUENCY: 2.4 GHZ TO 2.5 GHZ
- GAIN: 7 DBI
- IMPEDANCE: 50 OHM NOMINAL
- POLARIZATION: LINEAR VERTICAL
- VSWR: 1.92 MAXIMUM

INTERFACES/PORTS
- CONNECTORS: REVERSE SMA

ENVIRONMENTAL CONDITIONS
- TEMPERATURE: -20 C (-4 F) TO 65 C (149 F) OPERATING-30 C (-22
F) TO 75 C (167 F) STORAGE
- HUMIDITY: 0% TO 85% NON-CONDENSING OPERATING

PHYSICAL CHARACTERISTICS
- DIMENSIONS: 11.22 HEIGHT X 0.47 WIDTH
- SHIPPING DIMENSIONS: 6.5 HEIGHT X 7 WIDTH X 14.75 DEPTH
- WEIGHT: 1.41 OZ
- SHIPPING WEIGHT: 0.15 LB

MISCELLANEOUS
- ADDITIONAL INFORMATION: OMNIDIRECTIONAL DESIGN FOR 360 DEGREES OF
COVERAGE
- COMPATIBILITY: WRV54G WMP54GS WMP54G WET54G
WET54GS5 AS1SMA (ANTENNA STAND)
- CERTIFICATIONS & STANDARDS: FCC

WARRANTY
- STANDARD WARRANTY: 3 YEAR(S) LIMITED