Manufacturer's Part#: EG008W
Product Dimensions: 11.5 Inches x 9.75 Inches x 3 Inches
Weight: 2.3 Lbs

Features:
General Information
- Product Line: Instant Gigabit
- Marketing Information: The Gigabit 8-Port Workgroup Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements.



Apply this switching power to your current hub-based Ethernet network, and your data traffic efficiency will improve several times over. Connect your Gigabit-equipped workstations to the Switch's 10/100/1000 ports for full-duplex, dedicated bandwidth of up to 2000Mbps! It's perfect for graphics, multimedia, and other applications that have to move large files across the network quickly.

Networking
- Ports: 8 x RJ-45 10/100/1000Base-T Ports Auto MDI-MDIX
- Flow Control: IEEE 802.3x (Full Duplex), Back Pressure (Half Duplex)

Media & Performance
- Connectivity Media: Category 5e Twisted Pair (10/100/1000Base-T)
- Data Transfer Rate: 10Mbps Ethernet, 100Mbps Fast Ethernet, 1Gbps Gigabit Ethernet (Half-duplex), 2Gbps Gigabit Ethernet (Full-duplex)

Protocols & Management
- Status LEDs: - Power

- Link/Act

- Speed

- FDX

Miscellaneous
- Additional Information: - Forwards and filters packets at non-blocking, full wire speed

- All ports have auto speed negotiation and auto MDI/MDI-X crossover detection

- Supports address learning and aging, 802.3x flow control and head-of-line blocking prevention
- Bill of Materials: - One Gigabit 8-Port Workgroup Switch

- One AC Power adapter

- One registration card

- One User Guide
- System Requirements: - 200Mhz or Faster Processor

- 64MB RAM Recommended

- Ethernet or Gigabit Network Adapter

- Cat5e Ethernet Network Cable
- Certifications & Standards: - IEEE 802.3

- IEEE 802.3u

- IEEE 802.3x

- IEEE 802.3ab

- FCC Part 15 Class A

Power Description
- Input Voltage: 110V AC, 12V DC (Power Supply)
- Input Current: 2A
- Power Consumption: 18W
- Power Supply: External

Environmental Conditions
- Temperature: 32 to 122°F (Operating), -40 to 158°F (Storage), 0 to 50°C (Operating), -40 to 70°C (Storage)
- Humidity: 20 to 95% non-condensing (Operating), 20 to 95% non-condensing (Storage)

Physical Characteristics
- Form Factor: External
- Dimensions: 1.89" (Height) x 7.32" (Width) x 6.06" (Depth)
- Shipping Dimensions: 2.75" (Height) x 9.5" (Width) x 11.5" (Depth)
- Weight: 1.1 lb
- Shipping Weight: 2.29 lb

Warranty & Support
- Standard Warranty: 2 Year(s) Limited

GENERAL INFORMATION- MANUFACTURER: LINKSYS
- MANUFACTURER PART NUMBER: EG008W
- MANUFACTURER WEBSITE ADDRESS: WWW.LINKSYS.COM
- PRODUCT LINE: INSTANT GIGABIT
- PRODUCT NAME: INSTANT GIGABIT EG008W ETHERNET SWITCH
- MARKETING INFORMATION: THE GIGABIT 8-PORT WORKGROUP SWITCH PROVIDES
NON-BLOCKING WIRE SPEED SWITCHING FOR YOUR 10 100 AND 1000
MEGABIT NETWORK CLIENTS. DROP THIS SWITCH IN PLACE OF YOUR CURRENT
WORKGROUP HUB OR SWITCH AND YOU CAN UPGRADE YOUR HIGH-REQUIREMENT
WORKSTATIONS TO FULL GIGABIT SPEEDS AS NECESSARY WHILE CONTINUING
TO SERVICE OTHER CLIENTS AT THEIR CURRENT SPEEDS. OR BUILD YOUR
NETWORK FROM THE GROUND UP WITH APPROPRIATE LINK SPEEDS FOR EACH
USER'S REQUIREMENTS.
APPLY THIS SWITCHING POWER TO YOUR CURRENT HUB-BASED ETHERNET
NETWORK AND YOUR DATA TRAFFIC EFFICIENCY WILL IMPROVE SEVERAL TIMES
OVER. CONNECT YOUR GIGABIT-EQUIPPED WORKSTATIONS TO THE SWITCH'S
10/100/1000 PORTS FOR FULL-DUPLEX DEDICATED BANDWIDTH OF UP TO
2000MBPS! IT'S PERFECT FOR GRAPHICS MULTIMEDIA AND OTHER
APPLICATIONS THAT HAVE TO MOVE LARGE FILES ACROSS THE NETWORK
QUICKLY.
- PRODUCT TYPE: ETHERNET SWITCH

INTERFACES/PORTS
- INTERFACES/PORTS: 8 X 10/100/1000BASE-T
- INTERFACES/PORTS DETAILS: 8 X RJ-45 10/100/1000BASE-T PORT(S) AUTO
MDI/MDI-X

MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: CATEGORY 5E TWISTED PAIR 10/100/1000BASE-T
- DATA TRANSFER RATE: 10MBPS ETHERNET100MBPS FAST ETHERNET1GBPS
GIGABIT ETHERNET HALF-DUPLEX2GBPS GIGABIT ETHERNET FULL-DUPLEX

NETWORK & COMMUNICATION
- FLOW CONTROL: IEEE 802.3X (FULL-DUPLEX)BACK PRESSURE (HALF-DUPLEX)

CONTROLS/INDICATORS
- STATUS INDICATORS: POWERLINK/ACTSPEEDFDX

POWER DESCRIPTION
- INPUT VOLTAGE: 110 V AC12 V DC POWER SUPPLY
- INPUT CURRENT: 2A
- POWER CONSUMPTION: 18 W
- POWER SUPPLY: EXTERNAL

ENVIRONMENTAL CONDITIONS
- TEMPERATURE: 32 F (0 C) TO 122 F (50 C) OPERATING-40 F (-40
C) TO 158 F (70 C) STORAGE
- HUMIDITY: 20% TO 95% NON-CONDENSING OPERATING20% TO 95%
NON-CONDENSING STORAGE

PHYSICAL CHARACTERISTICS
- FORM FACTOR: DESKTOP
- DIMENSIONS: 1.89 HEIGHT X 7.32 WIDTH X 6.06 DEPTH
- SHIPPING DIMENSIONS: 2.75 HEIGHT X 9.5 WIDTH X 11.5 DEPTH
- WEIGHT: 1.1 LB
- SHIPPING WEIGHT: 2.29 LB

MISCELLANEOUS
- PACKAGE CONTENTS: ONE GIGABIT 8-PORT WORKGROUP SWITCHONE AC POWER
ADAPTERONE REGISTRATION CARDONE USER GUIDE
- ADDITIONAL INFORMATION: FORWARDS AND FILTERS PACKETS AT
NON-BLOCKING FULL WIRE SPEEDALL PORTS HAVE AUTO SPEED NEGOTIATION
AND AUTO MDI/MDI-X CROSSOVER DETECTIONSUPPORTS ADDRESS LEARNING AND
AGING 802.3X FLOW CONTROL AND HEAD-OF-LINE BLOCKING PREVENTION
- SYSTEM REQUIREMENT: 200MHZ OR FASTER PROCESSOR64MB RAM
RECOMMENDEDETHERNET OR GIGABIT NETWORK ADAPTERCAT5E ETHERNET NETWORK
CABLE
- CERTIFICATIONS & STANDARDS: IEEE 802.3IEEE 802.3UIEEE 802.3XIEEE
802.3ABFCC PART 15 CLASS A

WARRANTY
- STANDARD WARRANTY: 2 YEAR(S) LIMITED