Manufacturer's Part#: EG005W
Product Dimensions: 11.5 Inches x 10 Inches x 2.5 Inches
Weight: 2.2 Lbs

Features:
General Information
- Product Line: Instant Gigabit
- Marketing Information: The Gigabit 5-Port Workgroup Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements.



Apply this switching power to your current hub-based Ethernet network, and your data traffic efficiency will improve several times over. Connect your Gigabit-equipped workstations to the Switch's 10/100/1000 ports for full-duplex, dedicated bandwidth of up to 2000Mbps! It's perfect for graphics, multimedia, and other applications that have to move large files across the network quickly.



With the Gigabit 5-Port Workgroup Switch, you can connect your existing 10/100 Ethernet network to your Gigabit server backbone without any additional equipment. All ports are auto-negotiating, and have automatic MDI/MDI-X crossover detection, so you don't have to worry about the cable type. Address learning and aging is supported, as well as 802.3x flow control with head-of-line blocking prevention to keep your high-speed clients from bogging down in lower-speed traffic.



The Gigabit 5-Port Workgroup Switch from Linksys is the perfect solution for your desktop Gigabit and 10/100 networking needs.

Networking
- Ports: 5 x RJ-45 10/100/1000Base-T Ports Auto MDI-MDIX
- Flow Control: IEEE 802.3x (Full Duplex)

Media & Performance
- Connectivity Media: Category 5e Twisted Pair (10/100/1000Base-T)
- Data Transfer Rate: 10Mbps Ethernet, 100Mbps Fast Ethernet, 1Gbps Gigabit Ethernet
- Performance: Up to 2000Mbps Bandwidth

Protocols & Management
- Status LEDs: - Power

- Link/Act

- Speed

- FDX

Miscellaneous
- Additional Information: - Forwards and filters packets at non-blocking, full wire speed

- Supports address learning and aging, 802.3x flow control and head-of-line blocking prevention

- All ports suppport auto MDI/MDI-X cable detection
- Bill of Materials: - One Gigabit 5-Port Workgroup Switch

- One AC Power adapter

- One registration card

- One User Guide
- System Requirements: - 200Mhz or Faster Processor

- 64MB RAM Recommended

- Ethernet or Gigabit Network Adapter

- Cat5e Ethernet Network Cable
- Certifications & Standards: - IEEE 802.3

- IEEE 802.3u

- IEEE 802.3x

- IEEE 802.3ab

- FCC Part 15 Class A

Power Description
- Input Voltage: 12V DC (Power Supply), 110V AC
- Input Current: 2A
- Power Consumption: 18W

Environmental Conditions
- Temperature: 32 to 122°F (Operating), -40 to 158°F (Storage), -1 to 50°C (Operating), -40 to 70°C (Storage)
- Humidity: 20 to 95% non-condensing (Operating), 20 to 95% non-condensing (Storage)

Physical Characteristics
- Form Factor: External
- Dimensions: 1.89" (Height) x 7.32" (Width) x 6.06" (Depth)
- Shipping Dimensions: 2.5" (Height) x 10" (Width) x 11.5" (Depth)
- Weight: 1.1 lb
- Shipping Weight: 2.29 lb

Warranty & Support
- Standard Warranty: 2 Year(s) Limited

GENERAL INFORMATION- MANUFACTURER: LINKSYS
- MANUFACTURER PART NUMBER: EG005W
- MANUFACTURER WEBSITE ADDRESS: WWW.LINKSYS.COM
- PRODUCT LINE: INSTANT GIGABIT
- PRODUCT NAME: INSTANT GIGABIT EG005W ETHERNET SWITCH
- MARKETING INFORMATION: THE GIGABIT 5-PORT WORKGROUP SWITCH PROVIDES
NON-BLOCKING WIRE SPEED SWITCHING FOR YOUR 10 100 AND 1000
MEGABIT NETWORK CLIENTS. DROP THIS SWITCH IN PLACE OF YOUR CURRENT
WORKGROUP HUB OR SWITCH AND YOU CAN UPGRADE YOUR HIGH-REQUIREMENT
WORKSTATIONS TO FULL GIGABIT SPEEDS AS NECESSARY WHILE CONTINUING
TO SERVICE OTHER CLIENTS AT THEIR CURRENT SPEEDS. OR BUILD YOUR
NETWORK FROM THE GROUND UP WITH APPROPRIATE LINK SPEEDS FOR EACH
USER'S REQUIREMENTS.

APPLY THIS SWITCHING POWER TO YOUR CURRENT HUB-BASED ETHERNET
NETWORK AND YOUR DATA TRAFFIC EFFICIENCY WILL IMPROVE SEVERAL TIMES
OVER. CONNECT YOUR GIGABIT-EQUIPPED WORKSTATIONS TO THE SWITCH'S
10/100/1000 PORTS FOR FULL-DUPLEX DEDICATED BANDWIDTH OF UP TO
2000MBPS! IT'S PERFECT FOR GRAPHICS MULTIMEDIA AND OTHER
APPLICATIONS THAT HAVE TO MOVE LARGE FILES ACROSS THE NETWORK
QUICKLY.

WITH THE GIGABIT 5-PORT WORKGROUP SWITCH YOU CAN CONNECT YOUR
EXISTING 10/100 ETHERNET NETWORK TO YOUR GIGABIT SERVER BACKBONE
WITHOUT ANY ADDITIONAL EQUIPMENT. ALL PORTS ARE AUTO-NEGOTIATING
AND HAVE AUTOMATIC MDI/MDI-X CROSSOVER DETECTION SO YOU DON'T HAVE
TO WORRY ABOUT THE CABLE TYPE. ADDRESS LEARNING AND AGING IS
SUPPORTED AS WELL AS 802.3X FLOW CONTROL WITH HEAD-OF-LINE BLOCKING
PREVENTION TO KEEP YOUR HIGH-SPEED CLIENTS FROM BOGGING DOWN IN
LOWER-SPEED TRAFFIC.

THE GIGABIT 5-PORT WORKGROUP SWITCH FROM LINKSYS IS THE PERFECT
SOLUTION FOR YOUR DESKTOP GIGABIT AND 10/100 NETWORKING NEEDS.
- PRODUCT TYPE: ETHERNET SWITCH

INTERFACES/PORTS
- INTERFACES/PORTS: 5 X 10/100/1000BASE-T
- INTERFACES/PORTS DETAILS: 5 X RJ-45 10/100/1000BASE-T PORT(S) AUTO
MDI/MDI-X

MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: CATEGORY 5E TWISTED PAIR 10/100/1000BASE-T
- DATA TRANSFER RATE: 10MBPS ETHERNET100MBPS FAST ETHERNET1GBPS
GIGABIT ETHERNET
- PERFORMANCE: UP TO 2000MBPS BANDWIDTH

NETWORK & COMMUNICATION
- FLOW CONTROL: IEEE 802.3X (FULL-DUPLEX)

CONTROLS/INDICATORS
- STATUS INDICATORS: POWER LINK/ACT SPEED FDX

POWER DESCRIPTION
- INPUT VOLTAGE: 12 V DC POWER SUPPLY110 V AC
- INPUT CURRENT: 2A
- POWER CONSUMPTION: 18 W

ENVIRONMENTAL CONDITIONS
- TEMPERATURE: 32 F (0 C) TO 122 F (50 C) OPERATING-40 F (-40
C) TO 158 F (70 C) STORAGE
- HUMIDITY: 20% TO 95% NON-CONDENSING OPERATING20% TO 95%
NON-CONDENSING STORAGE

PHYSICAL CHARACTERISTICS
- FORM FACTOR: DESKTOP
- DIMENSIONS: 1.89 HEIGHT X 7.32 WIDTH X 6.06 DEPTH
- SHIPPING DIMENSIONS: 2.5 HEIGHT X 10 WIDTH X 11.5 DEPTH
- WEIGHT: 1.1 LB
- SHIPPING WEIGHT: 2.29 LB

MISCELLANEOUS
- PACKAGE CONTENTS: ONE GIGABIT 5-PORT WORKGROUP SWITCH ONE AC POWER
ADAPTER ONE REGISTRATION CARD ONE USER GUIDE
- ADDITIONAL INFORMATION: FORWARDS AND FILTERS PACKETS AT
NON-BLOCKING FULL WIRE SPEED SUPPORTS ADDRESS LEARNING AND AGING
802.3X FLOW CONTROL AND HEAD-OF-LINE BLOCKING PREVENTION ALL PORTS
SUPPPORT AUTO MDI/MDI-X CABLE DETECTION
- SYSTEM REQUIREMENT: 200MHZ OR FASTER PROCESSOR 64MB RAM RECOMMENDED
ETHERNET OR GIGABIT NETWORK ADAPTER CAT5E ETHERNET NETWORK CABLE
- CERTIFICATIONS & STANDARDS: IEEE 802.3 IEEE 802.3U IEEE 802.3X IEEE
802.3AB FCC PART 15 CLASS A

WARRANTY
- STANDARD WARRANTY: 2 YEAR(S) LIMITED