Manufacturer's Part#: VS92A
Product Dimensions: 9.5 Inches x 6.25 Inches x 2.5 Inches
Weight: 1.7 Lbs

Features:
General Information
- Marketing Information: The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the VS92A allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet. (Your average VGA card, combined with a standard VGA cable, can send a clear VGA signal approximately 25 feet.) This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.

Technical Information
- Computers Supported: 1
- Monitors Supported: 2
- Signal Types: VGA, SVGA, MultiSync
- Resolutions: 1920 x 1440 @ 60Hz
- VGA Bandwidth: 250MHz
- Operating Range: 210 ft

Interfaces
- Ports: 1 x 15-pin HD D-Sub (HD-15) Computer, 2 x 15-pin HD D-Sub (HD-15) Monitor

Power Description
- Input Voltage: 9V DC
- Power Consumption: 0.82W (Maximum)

Environmental Conditions
- Temperature: 41 to 104°F (Operating), 5 to 40°C (Operating), -4 to 140°F (Storage), -20 to 60°C (Storage)
- Humidity: 0 to 80% non-condensing Relative Humidity (Operating)

Physical Characteristics
- color: Gray
- Dimensions: 0.78" (Height) x 2.95" (Width) x 5.11" (Depth)
- Shipping Dimensions: 2.5" (Height) x 9.5" (Depth)
- Weight: 0.70 lb
- Shipping Weight: 2.03 lb
- Form Factor: External

Miscellaneous
- Bill of Materials: - 1 x VS-92A

- 1 x DC 9V Power Adapter

- 1 x User Manual
- Additional Information: - Transmission distance of up to 210 feet

- Daisy-Chain multiple units together for even more outputs

- Ideal for public broadcasting; remote monitoring; classroom and training facilities
- Compatibility: - PC

Warranty & Support
- Standard Warranty: Limited