1 GB 1024 MB DDR PC2700 333MHz Memory Module, CL=2.5, Unbuffered, Non-ECC, 2.5V, 128Meg x 64, 184-pin DIMM. A dual inline memory module DIMM consists of a number of memory components usually black that are attached to a printed circuit board usually green. The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. Information about which memory technology your system uses is included in the Crucial Memory Advisor tool. The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.