100Btx To 100Bfx Standalone Sc
Price: US$256.36
In Stock. Usually ships in 1-2 business days
Platform: Windows
Category: Windows Lan Equipment - Internetworking
By: Transition Networks
Manufacturer Part#: E-100BTX-FX-05(SC)
Transition Networks 100BASE-TX to 100BASE-FX Media Converter - 1 x RJ-45 , 1 x SC Duplex - 100Base-TX, 100Base-FX
Product Name : 100BASE-TX to 100BASE-FX Media Converter
Manufacturer Part Number : E-100BTX-FX-05(SC)
Manufacturer : Transition Networks, Inc
Brand Name : Transition Networks
Product Type : Media Converter
Description : Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.
Additional Information : Operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan.
Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times.
Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.
Automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.
The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.
Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.
Auto-Cross:
AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.
N-Way Auto-Negotiation:
Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.
Fiber Cable:
Bit error rate: < 10-9
Fiber Optic Cable Recommended:
- 62.5 / 125 ?m multimode fiber
Optional:
- 100 / 140, 85 / 125 , 50 / 125 ?m multimode fiber
Fiber Optic Connector:
Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.0 dB
Switches:
SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: LPT On/Off
SW4: FEF On/Of
Jumpers:
Jumper Block 1: Auto Cross enable
Physical Characteristics
Dimensions : 3" Height x 1" Width x 4.75" Depth
Weight : 0.5 lb
Packaging Characteristics
Shipping Dimensions : 3" Height x 9.75" Width x 12" Depth
Shipping Weight : 1.7 lb
Environmental Conditions
Temperature : 32 ?F (0.0 ?C) to 122 ?F (50.0 ?C) Operating
Altitude : 0 ft to 10000 ft Operating
#Networking
Network Technology : 100Base-FX
Connectivity
Interfaces/Ports : 1 x RJ-45
Number of Ports : 2
Connectivity Media : 100Base-TX Category 5 STP/UTP
Connectivity : STP/UTP
Power Characteristics
Input Voltage : 9 V DC
Warranty
Parts Warranty/Labor : - Lifetime
Standard Warranty : Lifetime Limited
Additional Warranty Information : Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable.
This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services.
Manufacturer Website Address : www.transition.com
Details
Status Indicators : Unit LED:
Power: Lit for normal operation
Port LEDs:
FACT (Fiber Activity): Blinking indicates activity
FLNK (Fiber LInk): Lit indicates Link
TPACT (Twisted Pair Activity): Blinking indicates activity
TPLNK (Twisted Pair Link): Lit indicates Link
Distance Support : 1.24Mile
Certifications & Standards : IEEE 802.3? 100BASE-FX, 100BASE-TX
UL Listed
FCC Class A
EN55024
EN55022 Class A
EN61000
CE Mark
Protocols : RMON
Manufacturer's Part#: E100BTXFX05SC
Product Dimensions: 12 Inches x 9.5 Inches x 3 Inches
Weight: 1.8 Lbs
Features:
General Information
- Marketing Information: Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.
Networking
- Ports: 1 x RJ-45 100Base-TX Port(s), 1 x SC 100Base-FX Port(s)
Media & Performance
- Connectivity Media: 100Base-TX Category 5 (UTP/STP), 100Base-FX 1300 nm Multimode (Fiber)
- Data Transfer Rate: 100Mbps Fast Ethernet
- Supported Distance: 1.24 mi Multimode Fiber, 328.08 ft Category 5 UTP/STP
Protocols & Management
- Protocols Supported: Fast Ethernet, SNMP, RMON
- Status LEDs: Unit LED:
- Power: Lit for normal operation
Port LEDs:
- FACT (Fiber Activity): Blinking indicates activity
- FLNK (Fiber LInk): Lit indicates Link
- TPACT (Twisted Pair Activity): Blinking indicates activity
- TPLNK (Twisted Pair Link): Lit indicates Link
Power Description
- Input Voltage: 9V DC
Environmental Conditions
- Temperature: 32 to 122°F (Operating), -4 to 185°F (Storage)
- Altitude: 0 to 10000 ft (Operating)
Physical Characteristics
- Dimensions: 3" (Height) x 1.0" (Width) x 4.75" (Depth)
- Weight: 0.5 lb
Miscellaneous
- Additional Information: - Operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan.
- Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times.
- Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.
- Automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.
- The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.
- Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.
Auto-Cross:
- AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.
N-Way Auto-Negotiation:
- Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.
Fiber Cable:
- Bit error rate: < 10-9
- Fiber Optic Cable Recommended:
- 62.5 / 125 µm multimode fiber
- Optional:
- 100 / 140, 85 / 125 , 50 / 125 µm multimode fiber
Fiber Optic Connector:
- Min TX PWR: -19.0 dBm
- Max TX PWR: -14.0 dBm
- RX Sensitivity: -30.0 dBm
- Max In PWR: -14.0 dBm
- Link Budget: 11.0 dB
Switches:
- SW1: Auto-Negotiation On/Off
- SW2: Pause TX On/Off
- SW3: LPT On/Off
- SW4: FEF On/Of
Jumpers:
- Jumper Block 1: Auto Cross enable
- Certifications & Standards: - IEEE 802.3r 100BASE-FX, 100BASE-TX
- UL Listed
- FCC Class A
- EN55024
- EN55022 Class A
- EN61000
- CE Mark
Warranty & Support
- Standard Warranty: Lifetime Limited
- Parts Warranty & Labor: Lifetime
Options and Accessories:
Power Supplies
039423 - EXTERNAL POWER SUPPLY FOR -48 VOLT TO 12 VOLT DC - SPS-48V
Rack Accessories
120491 - WALL MOUNT BRACKET 4IN FOR STANDALONE CONVERTER - WMBL
GENERAL INFORMATION- MANUFACTURER: TRANSITION NETWORKS INC.
- MANUFACTURER PART NUMBER: E-100BTX-FX-05(SC)
- PRODUCT NAME: 100BASE-TX TO 100BASE-FX MEDIA CONVERTER
- MARKETING INFORMATION: TRANSITION NETWORKS' 100BASE-TX TO
100BASE-FX MEDIA CONVERTER MAKES COST-EFFECTIVE INTEGRATION OF
TWISTED PAIR AND FIBER OPTICS IN FAST ETHERNET NETWORKS EASIER THAN
EVER BEFORE.
- PRODUCT TYPE: MEDIA CONVERTER
INTERFACES/PORTS
- INTERFACES/PORTS: 1 X RJ-45 100BASE-TX PORT(S)
- INTERFACES/PORTS: 1 X SC 100BASE-FX DUPLEX
MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: 100BASE-TX CATEGORY 5 UTP/STP
- CONNECTIVITY MEDIA: 100BASE-FX 1300 NM MULTIMODE FIBER
- DATA TRANSFER RATE: 100MBPS FAST ETHERNET
MANAGEMENT & PROTOCOLS
- PROTOCOLS: FAST ETHERNET
- PROTOCOLS: SNMP
- PROTOCOLS: RMON
PHYSICAL CHARACTERISTICS
- DIMENSIONS: 3 HEIGHT X 1.0 WIDTH X 4.75 DEPTH
- WEIGHT: 0.5 LB
WARRANTY
- STANDARD WARRANTY: LIFETIME LIMITED
|
