Physical Characteristics

#Networking

Connectivity

Warranty

Details

Manufacturer's Part#: E100BTXFX05
Product Dimensions: 12 Inches x 9.5 Inches x 3 Inches
Weight: 1.9 Lbs

Features:
General Information
- Marketing Information: Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.
- Package Quantity: 1 Pack
- Package Details: 1 x Media Converter

Networking
- Ports: 1 x RJ-45 100Base-TX Port(s), 1 x ST 100Base-FX Port(s)

Media & Performance
- Connectivity Media: 100Base-TX Category 5 (UTP/STP), 100Base-FX 1300 nm Multimode (Fiber)
- Data Transfer Rate: 100MBps Fast Ethernet
- Supported Distance: 1.24 mi Multimode Fiber, 328.08 ft Category 5 UTP/STP

Protocols & Management
- Protocols Supported: Fast Ethernet, SNMP, RMON
- Status LEDs: Unit LED:

- Power: Lit for normal operation



Port LEDs:

- FACT (Fiber Activity): Blinking indicates activity

- FLNK (Fiber LInk): Lit indicates Link

- TPACT (Twisted Pair Activity): Blinking indicates activity

- TPLNK (Twisted Pair Link): Lit indicates Link

Power Description
- Input Voltage: 9V DC

Environmental Conditions
- Temperature: 32 to 122°F (Operating), 0 to 50°C (Operating), -4 to 185°F (Storage), -20 to 85°C (Storage)
- Altitude: 0 to 10000 ft (Operating)

Physical Characteristics
- Dimensions: 3" (Height) x 1.0" (Width) x 4.75" (Depth)
- Weight: 0.5 lb

Miscellaneous
- Additional Information: - Operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan.

- Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times.

- Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.

- Automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.

- The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.

- Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.



Auto-Cross:

- AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.



N-Way Auto-Negotiation:

- Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.



Fiber Cable:

- Bit error rate: < 10-9

- Fiber Optic Cable Recommended:

- 62.5 / 125 µm multimode fiber

- Optional:

- 100 / 140, 85 / 125 , 50 / 125 µm multimode fiber



Fiber Optic Connector:

- Min TX PWR: -19.0 dBm

- Max TX PWR: -14.0 dBm

- RX Sensitivity: -30.0 dBm

- Max In PWR: -14.0 dBm

- Link Budget: 11.0 dB



Switches:

- SW1: Auto-Negotiation On/Off

- SW2: Pause TX On/Off

- SW3: LPT On/Off

- SW4: FEF On/Of



Jumpers:

- Jumper Block 1: Auto Cross enable
- Certifications & Standards: - IEEE 802.3r 100BASE-FX, 100BASE-TX

- UL Listed

- FCC Class A

- EN55024

- EN55022 Class A

- EN61000

- CE Mark

Warranty & Support
- Standard Warranty: Lifetime Limited
- Parts Warranty & Labor: Lifetime

Options and Accessories:
Power Supplies
039423 - EXTERNAL POWER SUPPLY FOR -48 VOLT TO 12 VOLT DC - SPS-48V

Rack Accessories
120491 - WALL MOUNT BRACKET 4IN FOR STANDALONE CONVERTER - WMBL

GENERAL INFORMATION- MANUFACTURER: TRANSITION NETWORKS INC.
- MANUFACTURER PART NUMBER: E-100BTX-FX-05
- PRODUCT NAME: 100BASE-TX TO 100BASE-FX MEDIA CONVERTER
- MARKETING INFORMATION: TRANSITION NETWORKS' 100BASE-TX TO
100BASE-FX MEDIA CONVERTER MAKES COST-EFFECTIVE INTEGRATION OF
TWISTED PAIR AND FIBER OPTICS IN FAST ETHERNET NETWORKS EASIER THAN
EVER BEFORE.
- PACKAGED QUANTITY: 1
- PRODUCT TYPE: MEDIA CONVERTER

INTERFACES/PORTS
- INTERFACES/PORTS: 1 X RJ-45 100BASE-TX PORT(S)
- INTERFACES/PORTS: 1 X ST 100BASE-FX PORT(S)

MEDIA & PERFORMANCE
- CONNECTIVITY MEDIA: 100BASE-TX CATEGORY 5 UTP/STP
- CONNECTIVITY MEDIA: 100BASE-FX 1300 NM MULTIMODE FIBER
- DATA TRANSFER RATE: 100MBPS FAST ETHERNET

MANAGEMENT & PROTOCOLS
- PROTOCOLS: FAST ETHERNET
- PROTOCOLS: SNMP
- PROTOCOLS: RMON

PHYSICAL CHARACTERISTICS
- DIMENSIONS: 3 HEIGHT X 1.0 WIDTH X 4.75 DEPTH
- WEIGHT: 0.5 LB

WARRANTY
- STANDARD WARRANTY: LIFETIME LIMITED