Each TalkSwitch system comes complete with sophisticated call-handling features that help you look big, reduce communications costs and stay connected everywhere. Multi-level auto attendants, built-in voicemail, innovative remote extensions and more are included. But sophisticated doesn’t mean complicated; TalkSwitch is a snap to set up and use.

FEATURES

    * Auto Attendants
    * Voicemail
    * Remote Extensions
    * Easy set-up
    * Expandable
    * Analog and IP phones
    * Dial-By-Name Directory
    * Voicemail to E-mail
    * Music on Hold
    * Call Cascade
    * Ring Groups
    * Uniform Call Distribution
    * Call Queue
    * Automatic Route Selection
    * Toll Restriction
    * Call Detail Record Logging
    * Line Appearance (with TS-9133i and TS-480i phones)
    * Multiple Language Prompts
    * Call Forward
    * Auto Fax Detection
    * Call Conference
    * Call Back/Call Bridge
    * Mode Scheduling
    * Call Hold/Transfer/Park
    * Call Screening
    * Intercom
    * Call Pickup
    * Distinctive Ring
    * Public Announcement
    * Remote Management
    * LAN capability
    * Free Software Upgrades

System
Analog trunks 	2
Analog extension interfaces	4
Extension capacity	16: 4 analog or IP, 12 pure IP
USB interface	1
Ethernet interface	1
Memory	2 hours
Memory expansion	1, 2, 4.5 and 9 hour memory cards
Music input	Phono jack (1/8" mono) or stored .wav file
PA output	Phono jack (1/8" mono) or stored .wav file
Power source	120 VAC, 60 Hz — In / 16 VAC, 1.5 A — Out
Power-failure line to extension jacks	Extension 4 connects to Line 1

Analog extension interface
Connector type	RJ-11, 2-pin
Trunk type	Loop start
Interface impedance	600 ohms
Loop range	0–600 ohms
Hook flash supported	Yes
On-hook voltage	35 volts
Off-hook loop voltage source	35 volts
Off-hook loop current	23 mA to 40 mA
Dial tone level	-2.4 dBm
Ringing voltage	90 volts RMS
Ringing frequency	20 Hz – true sine wave
Total ringing load	5 REN

Analog trunks
Connector type	RJ-11, 2-pin
Trunk type	Loop start
Interface impedance	Configurable, 600 ohms, 600 complex, 900 ohms, 900 complex
Ringing impedance	3,900 ohms
Ringing sensitivity	45 volts RMS @ 20 Hz
REN	0.7B
Longitudinal balance	69 dB
Signal level	-10 dB
Distinctive ring supported	Yes
Caller ID support	FSK, all lines

Dimensions (H x W x L)
Metric	51.6 mm x 203.2 mm x 213.4 mm
Imperial	2.03" x 8" x 8.4"

Weight
Metric	0.65 kg
Imperial	1.43 lbs

240vs - 2 analog lines, 4 ext, 0 VoIP trunks