FEATURES- PCI 10BaseT/100BaseTX Network Interface Card                      
       (1) auto-sensing 10/100 Mbps port that supports full or half-       
          duplex (up to 200Mbps in full-duplex mode).                       
        32-bit architecture and PCI bus mastering enable speedy network     
         response with minimal CPU overhead.                                
        A graphical interface guides the user through the installaion of    
         software drivers and support files for all popular network oper-   
         ating systems. Plug & Play compliance enables the adapter to be    
         automatically configured.                                          
        Three LEDs on the front panel "100 Mbps, 10 Mbps and Activity"
         provide intuitive feedback on network status and performance.      
        Use it in future 3.3-volt PCI systems, and in 5-volt PCI systems    
         today.                                                             
 Includes card, installation disk, installation manual, warranty card.      
     
  -- SPECIFICATIONs ----------------------------------
STANDARDS      - IEEE 802.3i, 802.3u                                        
INTERFACE/BUS  - 32-bit PCI bus mastering                                   
CONNECTOR(s)   - ( 1) 10BaseT/100BaseTX/RJ45 port                           
STATUS LEDs    - 100 Mbps, 10 Mbps, Activity                                
DRIVERS        - Support for Microsoft Windows for Workgroup 3.11, NT 3.51/ 
                  4.0 and Windows 95/98/2000.                               
                 Novell NetWare Client32 for DOS Client for Windows 95/98   
                  and Server 4.10/4.11/5.0.                                 
                 RedHat Linux 5.4, 6.0 SCO OpenServer (Unix) NDIS 2.0 for   
                  DOS driver for operating systems that require it.

The NETGEAR FA311 is an auto-sensing, 100Base-TX Fast Ethernet PCI adapter designed to support the next generation multimedia power-applications. The NETGEAR adapter is like two in one--while it supports the 100Base-TX 100Mbps high-speed standard, it also runs in the pervasive 10Base-T 10Mbps mode.

Manufacturer's Part#: FA311
Product Dimensions: 9.1 Inches x 6.5 Inches x 1.5 Inches
Weight: 0.4 Lbs

Features:
General Information
- Marketing Information: NETGEAR's FA311 Ethernet Network Card connects you to other networked computers, printers, zip drives, routers, network storage and the Internet. Plug it in and you'll achieve high-speed transfer of all kinds of data.



Robust! NETGEAR's single chip design improves the reliability of your network card performance. And you'll be prepared for the future with both 3.3v PCI and low-profile PCI capability-no upgrades required.
- Package Quantity: 1

Networking
- Ports: 1 x RJ-45 10/100Base-TX Port (Auto-sensing)
- Bus Type: 32-bit PCI

Media & Performance
- Connectivity Media: 10/100Base-TX (Twisted Pair)
- Data Transfer Rate: 10Mbps Ethernet (Half-duplex), 20Mbps Fast Ethernet (Full-duplex), 100Mbps Fast Ethernet (Half-duplex), 200Mbps Fast Ethernet (Full-duplex)

Protocols & Management
- Protocols Supported: Ethernet, Fast Ethernet, TCP/IP, IPX/SPX, UDP
- Status LEDs: - 100 Mbps

- 10 Mbps

- Activity

Power Description
- Input Voltage: 3.3V DC, 5V DC

Miscellaneous
- Additional Information: O/S COMPATIBILITY:

- All major operating systems are supported: Microsoft Windows, Microsoft NT, Novell NetWare, RedHat Linux, and SCO OpenServer Unix.



RAPID TRANSIT:

- 10/100 Mbps auto-sensing capability speeds up performance and eliminates the need for manual switching.



GUESS WORK-FREE:

- Three LEDs on the front panel-100 Mbps, 10 Mbps and Activity-provide intuitive feedback on network status and performance.



PLUG AND PLAY, ALL THE WAY:

- Open your PC, plug in the card, start your PC and install the driver from the floppy diskette. Simple GUI-driven installation instructions make setup a cinch.



UNCOMPLICATED:

- Single chip reliability combined with NETGEAR's renowned engineering ensure smooth-running usability.



FUTURE PROOF

- Use it in future 3.3-volt PCI systems, and in 5-volt PCI systems today.



Drivers Provided:

- Microsoft Windows for Workgroups 3.11, Windows NT 3.51, 4.0 Windows 95, 98, Windows 2000, ME, Drivers inside Windows XP

- Novell NetWare Client32 for DOS Client for Windows 95/98 Server 4.10, 4.11, 5.0

- RedHat Linux 5.4, 6.0 SCO OpenServer (Unix) NDIS 2.0 for DOS driver for operating systems that require it
- Bill of Materials: - FA311 network card

- Installation guide

- Installation disk
- System Requirements: Min Operating System:

- Novell NetWare 5.0

- Novell NetWare 4.1

- SCO OpenServer

- Microsoft Windows NT 3.51 or later

- Novell NetWare 4.11

- Microsoft Windows 2000

- Microsoft Windows 3.x/95/98

- Red Hat Linux 6.0
- Certifications & Standards: - IEEE 802.3-LAN

- IEEE 802.3U-LAN

Physical Characteristics
- Dimensions: 5.7" (Width) x 3.7" (Depth)
- Weight: 0.2 lb

Warranty & Support
- Standard Warranty: Lifetime Limited

Options and Accessories:
Switches & Bridges
749255 - FS100 - FS105 - 5 x 10/100Base-TX LAN Ports - Ethernet Switch - FS105NA