Manufacturer's Part#: 119212129
Product Dimensions: 24 Inches x 22 Inches x 20 Inches
Weight: 42.6 Lbs

Features:
General Information
- Marketing Information: - Economical and Reliable CRT Touch Monitor Solutions:

MicroTouch CRT touch monitors provide solutions for a broad range of applications including point-of-sale, hospitality, and retail. An economical choice compared to FPD touch monitors of the same size, our CRT monitors bring you a reliable, highvalue touch solution. MicroTouch CRT monitors offer integrators the size options and touch technology needed to meet their customers' needs.



- Making the Difference:

Touch robustness or input flexibility, 3M Touch Systems knows each touch monitor application has a unique set of requirements. That's why MicroTouch CRT monitors are offered with a choice of two touch technologies.



ClearTek capacitive touch technology provides accuracy and sensitivity to the user's touch while offering outstanding durability. ClearTek provides scratch-resistance and contaminant-resistance to dirt, liquids, and harsh chemicals. A ClearTek sensor with Industrial (C) Etch has been tested in a laboratory environment to withstand over 225 million mechanical touches without noticeable degradation to the surface.*



Resistive 5-wire touch technology provides fast, accurate, and reliable touch when input flexibility is the most important consideration. Resistive 5-wire responds to the touch of fingernails, credit cards, gloved hands and fingers. Resistive 5-wire technology has been tested in a laboratory environment to withstand 35 million mechanical touches without noticeable degradation to the surface.*



* Mechanical touches for capacitive were tested on a single x,y location and for resistive were tested on a single 1cm location, each using a finger-like stylus of 45 durometer, "A" shore hardness, 0.5 diameter with a load of 0.46 pounds, +/- .01 pounds of force.

Technical Information
- Screen Size: 17" Actual Size, 16" Viewable Size
- Screen Type: Flat Screen CRT
- Screen Surface: Anti-Glare, Anti-Static
- Dot Pitch: 0.27mm (Shadow Mask)
- Input Signal: RGB (Analog)
- Front Panel Control: Menu, Select, Adjust, Power

Display
- Resolution: 1280 x 1024 Maximum Resolution
- Graphics Preset Modes: 640 x 480 @ 60 to 85Hz, 720 x 400 @ 70Hz, 800 x 600 @ 60 to 85Hz, 1024 x 768 @ 60 to 85Hz, 1280 x 1024 @ 60Hz
- Color Support: Unlimited Colors
- Scanning Frequencies: 30 to 70KHz Horizontal, 50 to 150Hz Vertical
- OSD Controls: - Brightness

- Contrast

- Horizontal/Vertical Size and Position

- Pincushion

- Trapezoid

- Parallelogram

- Pin Balance

- Color

- Recall

- Degauss

Touch Screen Information
- Touchscreen Type: Capacitive

Interfaces
- Cable Connector: 15-pin D-sub

Power Description
- Input Voltage: 100 to 240V AC
- Power Consumption: 85W (Maximum)
- Frequency: 50 to 60Hz
- Power Management System: DPMS, VESA

Environmental Conditions
- Temperature: 0 to 40°C (Operating), -25 to 60°C (Storage), 32 to 104°F (Operating), -13 to 140°F (Storage)
- Humidity: 90% non-condensing Relative Humidity (Operating)

Physical Characteristics
- Dimensions: 16.6" (Height) x 15.7" (Width) x 15.5" (Depth)
- Shipping Dimensions: 18.00" (Height) x 20.75" (Width) x 21.5" (Depth)
- Weight: 39.6 lb
- Shipping Weight: 42.00 lb
- Body Color: Beige

Miscellaneous
- Additional Information: - Available with MicroTouch ClearTek capacitive or 5-wire resistive touch screen technology

- Easy to integrate with plug and play capability

- Individually designed, engineered, and tested for volume production using ISO 9001 procedures.

- Accurate, reliable touch performance

- VESA Plug and Play: DDC1/2B

- Display Capability: Auto-sync within scan frequencies

- Features: ClearTek capacitive touch technology

- Movement Detection Technology: Capacitive

- Drivers & Utilities

- 3M TouchWare



- Display Area (WxH):

- 324 x 244 mm

- 12.8 x 9.6 inches



- Power Savings:

- DPMS: Display power management signaling for reduced power comsumption during non-use.
- Compatibility: PC
- Approvals & Certifications: - FCC B

- CE

- UL/cUL

Warranty & Support
- Standard Warranty: 3 Years Limited
- Parts Warranty & Labor: 3 Years - Monitor, 5 Years - Touch Sensor/Electronics