Features:
General Information
- Marketing Information: Tripp Lite's SMART1050SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 18 minutes half load runtime and 6 minutes fully loaded. 1050VA / 670 watt power handling capability and full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes 8 protected NEMA 5-15R output receptacles. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory, USB and DB9 serial monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS and line power status, plus output power control for scheduled or immediate reboot of all connected devices at once. Includes PowerAlert UPS monitoring and unattended shutdown software with built-in management support for an unlimited number of network UPS systems. Free PowerAlert enterprise management software is also available for select opportunities. Built-in audible alarm and 15 LEDs provide graphical readout of line power, battery power, battery charge level, load level, plus AVR boost and trim operational status information. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, black tower housing in rugged all-metal enclosure. Two year warranty with $250,000 Ultimate Lifetime Insurance.
- UPS Type: Line-interactive
- Equipment Protection Value: US $250000

Technical Information
- Plug Type: NEMA 5-15P
- Receptacles & Types: 8 x NEMA 5-15R
- Interface Ports: 1 x DB-9, 1 x USB
- Modular Slots: 1 x Communications Slot

Battery Information
- Battery Type: Sealed Lead Acid User-replaceable (Hot-Swappable)
- Battery Life: 3 to 6 Year(s)
- Backup/Run Time: 6 Minute(s) 1050VA (Full Load), 18 Minute(s) 525VA (Half Load)
- Backup/Run Time (O.L.D): 6 Minutes (Full Load)
- Recharge Time: 4 Hour(s) (Minimum)

Management
- Audible Alarms: On Battery, Overload
- Front Panel LEDs: Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
- Network Manageability: SNMP Manageable (Optional)

Power Description
- Load Capacity: 1050VA, 670W
- Waveform Type: Sine Wave
- Filtering: EMI / RFI
- UPS Voltages: 120V AC (Single-phase) 60Hz Input Voltage, 120V AC (Single-phase) 60Hz Output Voltage

Environmental Conditions
- Temperature: 32 to 104°F (Operating)
- Humidity: 0 to 95% Non-condensing Relative Humidity

Miscellaneous
- Additional Information: - SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
- 1050VA / 670 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
- Large internal batteries offer runtimes of 18 minutes at half load (525VA / 335 watts) and 6 minutes at full load (1050VA / 670 watts)
- Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V
- Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
- PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
- Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
- Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
- Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
- 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality
- Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
- UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed
- 2 year warranty with up to $250,000 connected equipment insurance
- Bill of Materials: - SMART1050SLT UPS System
- PowerAlert Software CD-Rom
- USB and serial cabling
- User manual with warranty information
- System Requirements: TYPICAL APPLICATIONS:
Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously-regulated output power.
- Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications

Physical Characteristics
- Power Cable Length: 6 ft
- Form Factor: Tower (External)
- Dimensions: 8.75" (Height) x 6.75" (Width) x 16.75" (Depth)
- Shipping Dimensions: 13" (Height) x 10" (Width) x 23.75" (Depth)
- Weight: 43 lb
- Shipping Weight: 48.5 lb

Warranty & Support
- Standard Warranty: 2 Year(s)